Returning Customer ?
Don't have an account ?
No products in the cart.
Showing 1–48 of 51 results
For single-phase AC voltage motors up to 2.2 kW. Mostly used as start-up capacitors. 100 μF, 260 V AC, 50/60 Hz
2.2 kW AC motor for portable compressors. Rugged and reliable. Used worldwide in countless portable compressors.
For oil/water separators. Considerably increases final separator performance. Effective up to 70 m3/hr.
Filter monitor and operating hours counter for smaller cartridge filter systems. Reliably shows cartridge service life and indicates maintenance intervals.
Order number N27286
Replacement battery for B-Timer with a service life of approx. 3 years at 500 hours/year.
Order number 82743
Genuine BAUER synthetic compressor oil for compressors built after 9/2006. Suitable for continuous operation and high ambient temperatures. Non-toxic.
Order number N28355-1
For oil pump drives on older small blocks. Secure driving with belt. Guarantees constant oil pressure.
For adapters 64013, 67797, 64118. Stable and snug, for all corresponding universal adapters.
For, e.g., filling panel pressure inlets. Certified up to 630 bar, used all over.
Oil funnel for all compressor types. With a neck diameter of 160 mm and a neck length of 300 mm, can also be used for inaccessible areas.
Poseidon P635-133 for P635-3 filling connector. Select materials. Designed for reliable continuous use.
Adaptor for Aero test oil impactors. For recording new oil impactors. With quick fastener for easy impactor replacement.
On/off switch with motor guard for Junior and PE100. On/off switch with integrated overload protection. Trigger element is a thermostatic bi-metal.
Female square key for opening compressor housings. Rugged metal key with 8 mm female square and integrated cylinder opener.
For diesel motors. High-performance oil for diesel motors. Product offers protection for diesel motors in difficult operating conditions.
For, e.g., adapter 67797 or safety valve 059410. O-rings available in all sizes and hardnesses. Select materials ensure durability and tightness in all areas.
For various system types. A critical tool. Should be included in any compressor, especially for determining maintenance intervals and when to replace the filter.
Order number N23853
Subaru EX17, 4.2 kW, 5.7 HP. Lightweight and powerful. Quieter than comparable models. Easy to start, even at low temperatures.
Order number N30368
Piston for lever filling valves. Stainless and precision-manufactured, for reliable lever filling valve operation.
Piston liner without piston ring for small blocks. Piston liners manufactured down to the nearest thousandth millimetre. Absolute precision.
Piston liner with piston ring for small blocks. With its 7 special piston rings, always ensures adequate pressure.
With its 7 special piston rings, always ensures adequate pressure.
Plug for KAA manual drain. Seals even at low seat pressure.
Order number 64498
0–600 bar, 1/4″ rear connector, no front ring, charged with glycerine. Hermetically sealed with internal pressure compensation. Recommended for highly dynamic loads, pressure spikes, vibrations, and pulsations.
0–400 bar, 1/4″ rear connector, with front ring, charged with glycerine. Hermetically sealed with internal pressure compensation. Recommended for highly dynamic loads, pressure spikes, vibrations, and pulsations.
0–400 bar, 1/4″ bottom connector, no front ring, not glycerine- charged.
For 200–300 bar filling panels. Small and powerful.
Used in thousands of systems. Popular for various applications.
Order number N21826
0–400 bar, 1/4″ male thread for various blocks and controllers. Stainless steel housing, accurate even in adverse conditions.
Order number N25421
220–350 bar pressure range Fixed hysteresis. Pressure switch for semi-automatic and fully automatic, with Japan certification. Ideal for the 200–300 bar pressure range in breathing range.
Order number N1010-J
For the 220–350 bar pressure range. Fixed hysteresis. Most used pressure switch for semi-automatic and fully automatic systems. Ideal for the 200–300 bar pressure range in breathing range.
Order number N1010
Oil pressure switch for small, 1.8–2.3 bar blocks. Small, lightweight (approx. 30 g) and rugged. Can withstand temperatures between -40°C and 130 °C. Up to 100,000 switching cycles.
Order number N26437
Signal converter for older Securus without bus system. Reliable signal converter. Compact evaluation electronics.
B-Securus signal converter with bus connection. Compact, versatile, and modern thanks to digital data transmission.
230 V AC, for installing, e.g., on filter containers. Specially developed for hard-wired controllers. Can also be used as a self-contained indicator only. For a wide variety of uses.
24 V AC, for installing, e.g., on filter containers. Specially developed for hard-wired controllers. Can also be used as a self-contained indicator only. For a wide variety of uses.
For Securus system with BNC connector. The 3 cartridge state ranges (in use, warning, full) make the monitor easy and efficient to check.
For O-rings. Silicon-based, reduces material ageing.
For 200/300 bar P21 filters. For easy and flexible filling of 200 and 300 bar cylinders using a single handle.
KTY84 with rectangular, 2-pin connector. Found in older systems but still up to date. Can withstand temperatures from -40 °C to 300 °C.
PT 100 without ATEX connector. Sensor cable with Teflon insulation. Can withstand high temperatures.
PT 1000 with M12 ATEX connector and calibration certificate. Specially designed for applications using explosive gases. With ATEX/ PTB certification and calibration certificate for 20 °C, 40 °C, 60 °C, and 80 °C.
PT 1000 with M12 ATEX connector. Specially designed for applications using explosive gases. With ATEX/PTB certification.
PT 1000 with M12 connector. Good heat transfer thanks to aluminium housing. Stainless steel bend protection. Shock-resistant and in water- tight casing.
185 °C PTC temperature sensor. Brass housing ensures optimal heat transfer. Not a single degree is lost.
2.2 kW three-phase motor for portable compressors. Aluminium housing makes it lightweight, small, yet still powerful.
Order number N3388-ATB-IE3-F01
For PE100, Junior, Oceanus. With removable handle for easy storage. Low centre of gravity and wide tyres ensure good handling, even over rough terrain.
Order number 168013
For Capitano and Mariner. High-performance genuine part.
Order number 82330
